United States Stove Company SP8000 Technical Information Page 158
- Page / 241
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide 158
B
Daylight Saving
Time Enable
Daylight Saving Time can be turned on or off. This option
affects the time stamp on CallerID and affects all the lines
and extensions of the phone. Default is Yes (on).
FXS Port Input Gain Input gain in dB, up to three decimal places. The range is
6.000 to -12.000.
The default is -3.
FXS Port Output
Gain
Output gain in dB, up to three decimal places. The range is
6.000 to -12.000. The Call Progress Tones and DTMF
playback level are not affected by the
FXS Port Output
Gain
parameter.
The default is -3.
DTMF Playback
Level
Local DTMF playback level in dBm, up to one decimal
place.
The default is -16.0.
DTMF Playback
Length
Local DTMF playback duration in milliseconds.
The default is .1.
Detect ABCD To enable local detection of DTMF ABCD, select yes.
Otherwise, select no.
The default is yes. Setting has no effect if DTMF Tx Method
is INFO; ABCD is always sent OOB regardless in this
setting.
Playback ABCD To enable local playback of OOB DTMF ABCD, select yes.
Otherwise, select no.
The default is yes.
- Cisco Small Business 1
- Analog Telephone Adapters 1
- ADMINISTRATION 1
- , Cisco Stackpower 2
- About This Document 11 3
- Contents 10
- About This Document 11
- Document Conventions 12
- • Perform advanced searches 13
- Finding Text in a PDF 13
- STEP 3 In the 14
- Telephone Adapters 16
- Comparison of ATA Devices 17
- Optional On-Site 17
- Call Control 17
- (SPA9000 or Legacy PBX) 17
- ATA Connectivity Requirements 20
- PAP2T Connectivity 21
- SPA2102 Connectivity 22
- SPA3102 Connectivity 23
- SPA8000 Connectivity 24
- SPA8800 Connectivity 25
- ATA Software Features 26
- SIP Proxy Redundancy 28
- Other ATA Software Features 28
- Modem Line Toggle Code 29
- FAX Disable ECAN 29
- DTMF Tx Mode 30
- three-way call serv 31
- ATA S of t w a re Feature s 32
- Feature Description 32
- Downloading Firmware 37
- Setting up Your ATA Device 38
- Router > Status 40
- Line 1 42
- Upgrade URL 43
- Advanced Configurations 43
- Resync URL 44
- Reboot URL 44
- Provisioning Your ATA Device 45
- Configuration Profile 46
- Interoperability 47
- Firewalls and SIP 53
- Configuring SIP Timer Values 53
- Configuring Voice Services 54
- Using a FAX Machine 55
- • Echo Canceller: no 56
- • Silence suppression: no 56
- • Preferred Codec: G.711 56
- • Use pref. codec only: yes 56
- Fax Troubleshooting 56
- • Jitter 57
- Managing Caller ID Service 58
- Configuring Dial Plans 61
- (exclamation point) 63
- • Extensions on your system 64
- • U.S. long distance dialing 65
- • Blocked number 65
- • U.S. international dialing 65
- • Informational numbers 65
- • SYNTAX 2: sequence Ss 69
- Editing Dial Plans 70
- Secure Call Implementation 71
- Mini Certificate 74
- SRTP Private Key 74
- About SIP Trunking 76
- • 1,2,3,4,5,6,7,8,hunt=re;*;1 80
- Configuring a Trunk Group 82
- Trunk Group Management 83
- Trunk Status page 84
- Setting the Hunt Policy 85
- Configuring Music on Hold 86
- Call Feature Settings 87
- MOH Server 87
- Romance de Amor 87
- PSTN gateway 92
- VoIP gateway 92
- How VoIP-To-PSTN Calls Work 93
- How PSTN-To-VoIP Calls Work 95
- Terminating Gateway Calls 96
- (SPA3102) 98
- Other Options 99
- Call Scenarios 100
- Outside Dial Tone 100
- VoIP Caller ID Pattern 102
- VoIP Access List 102
- Cfwd All Dest 104
- ATA Routing Field Reference 105
- Product Information section 106
- System Status section 106
- WAN Status page 107
- Static IP Settings section 108
- PPPoE Settings section 108
- Optional Settings section 109
- MAC Clone Settings section 110
- Remote Management section 110
- QOS Settings section 110
- LAN Status page 111
- Application page 112
- DMZ Settings section 113
- ATA Voice Field Reference 115
- Info page 116
- Voice tab > Info page > 116
- System page 124
- SIP page 127
- Voice tab > SIP page > 127
- SIP User Agent Name 128
- Use Compact Header 128
- Regional page 139
- Call Progress Tones section 140
- SPA8000) 154
- Miscellaneous section 156
- FXS Port Output 158
- Line page 160
- Voice tab > Line page > 161
- Outbound Proxy 167
- Use Outbound 167
- Register 170
- Disconnect Tone 187
- Trunk Group page (SPA8000) 191
- SIP Settings section 192
- Dial Plan section 197
- NAT Settings section 197
- PSTN Line page (SPA3102) 199
- Network Settings section 201
- Based on SRV port 206
- Audio Configuration section 207
- Dial Plans section 211
- Caller 1/2/3/4/5/6/7/8 PIN 213
- Ring Settings section 214
- Long Silence Duration 216
- Detect Long Silence 217
- User page 221
- Call Forward Settings section 222
- Speed Dial Settings section 223
- PSTN User page (SPA3102) 227
- Troubleshooting 229
- STUN Enable 232
- STUN Server 232
- STUN Test Enable 232
- Environmental Specifications 233
- Where to Go From Here 237
- Related Documentation 238
- - Variable Defintions 241
- - Conditional Text Settings 241
© 2020, manymanuals.com. All rights reserved. | 0.195 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals