United States Stove Company SP8000 Technical Information download pdf (Page 42)

Basic Administration and Configuration

Using the Administration Web Server

Cisco Small Business ATA Administration Guide 42

Registering to the Service Provider

To use VoIP phone service, you must configure your ATA device to the Service

Provider.

STEP 1 Start Internet Explorer, connect to the administration web server, and choose

Admin access with Advanced settings.

STEP 2 Click Voice tab > Line

, where

is the line number that you want to configure.

STEP 3 Enter the account information for your ITSP. The following is the minimum required

configuration to connect the ATA device to an ITSP:

• User ID: The account number or logon name for your ITSP account (Subscriber

Information section)

• Password: The password for your ITSP account (Subscriber Information

section)

• Proxy: The proxy server for your ITSP account (Proxy and Registration section)

STEP 4 After making any necessary changes, click the Submit All Changes button.

STEP 5 To verify your progress, perform the following tasks:

• After the devices reboot, click Voice tab > Info. Scroll down to the

Line 1

Status

section of the page. Verify that the line is registered.

• Use an external phone to place an inbound call to the telephone number that

was assigned by your ITSP. Assuming that you have left the default settings in

place, the phone should ring and you can pick up the phone to get two-way

audio.

• If the line is not registered, you may need to refresh the browser several times

because it can take a few seconds for the registration to succeed. Also verify

that your DNS is configured properly.

NOTE If the device has more than one Line tab, each line tab must be configured

separately. Each line tab can be configured for a different ITSP.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 240 241

No comments

United States Stove Company SP8000 Technical Information Page 42