United States Stove Company SP8000 Technical Information Page 22
- Page / 241
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Introducing Cisco Small Business Analog Telephone Adapters
ATA Connectivity Requirements
Cisco Small Business ATA Administration Guide 22
1
SPA2102 Connectivity
As shown in the following illustration, the SPA2102 has two FXS ports (voice lines
1 and 2).
By default, the device attached to the LAN port is assigned the network address
192.168.0.0 with a subnet mask of 255.255.255.0. If there is a network address
conflict with a device on the Ethernet port, the network address of the device on
the LAN port is automatically changed to 192.168.1.0.
NOTE
• The IVR functions are accessed by connecting an analog telephone to Line 1.
• For proper operation, the service provider should use an Outbound Proxy to
forward all voice traffic when the SPA2102 is located behind a router. If
necessary, explicit port ranges can be specified for SIP and RTP.
Line 1
Line 2
Internet
IP Router (with
hairpinning) or
Broadband mode
m
ITSP
ISP
SPA
2102
LAN
WAN
Ethernet
port
LAN
port
Administrative
I
VR (Line 1 or
Line 2)
IP
IP
Administration
PC
187257
- Cisco Small Business 1
- Analog Telephone Adapters 1
- ADMINISTRATION 1
- , Cisco Stackpower 2
- About This Document 11 3
- Contents 10
- About This Document 11
- Document Conventions 12
- • Perform advanced searches 13
- Finding Text in a PDF 13
- STEP 3 In the 14
- Telephone Adapters 16
- Comparison of ATA Devices 17
- Optional On-Site 17
- Call Control 17
- (SPA9000 or Legacy PBX) 17
- ATA Connectivity Requirements 20
- PAP2T Connectivity 21
- SPA2102 Connectivity 22
- SPA3102 Connectivity 23
- SPA8000 Connectivity 24
- SPA8800 Connectivity 25
- ATA Software Features 26
- SIP Proxy Redundancy 28
- Other ATA Software Features 28
- Modem Line Toggle Code 29
- FAX Disable ECAN 29
- DTMF Tx Mode 30
- three-way call serv 31
- ATA S of t w a re Feature s 32
- Feature Description 32
- Downloading Firmware 37
- Setting up Your ATA Device 38
- Router > Status 40
- Line 1 42
- Upgrade URL 43
- Advanced Configurations 43
- Resync URL 44
- Reboot URL 44
- Provisioning Your ATA Device 45
- Configuration Profile 46
- Interoperability 47
- Firewalls and SIP 53
- Configuring SIP Timer Values 53
- Configuring Voice Services 54
- Using a FAX Machine 55
- • Echo Canceller: no 56
- • Silence suppression: no 56
- • Preferred Codec: G.711 56
- • Use pref. codec only: yes 56
- Fax Troubleshooting 56
- • Jitter 57
- Managing Caller ID Service 58
- Configuring Dial Plans 61
- (exclamation point) 63
- • Extensions on your system 64
- • U.S. long distance dialing 65
- • Blocked number 65
- • U.S. international dialing 65
- • Informational numbers 65
- • SYNTAX 2: sequence Ss 69
- Editing Dial Plans 70
- Secure Call Implementation 71
- Mini Certificate 74
- SRTP Private Key 74
- About SIP Trunking 76
- • 1,2,3,4,5,6,7,8,hunt=re;*;1 80
- Configuring a Trunk Group 82
- Trunk Group Management 83
- Trunk Status page 84
- Setting the Hunt Policy 85
- Configuring Music on Hold 86
- Call Feature Settings 87
- MOH Server 87
- Romance de Amor 87
- PSTN gateway 92
- VoIP gateway 92
- How VoIP-To-PSTN Calls Work 93
- How PSTN-To-VoIP Calls Work 95
- Terminating Gateway Calls 96
- (SPA3102) 98
- Other Options 99
- Call Scenarios 100
- Outside Dial Tone 100
- VoIP Caller ID Pattern 102
- VoIP Access List 102
- Cfwd All Dest 104
- ATA Routing Field Reference 105
- Product Information section 106
- System Status section 106
- WAN Status page 107
- Static IP Settings section 108
- PPPoE Settings section 108
- Optional Settings section 109
- MAC Clone Settings section 110
- Remote Management section 110
- QOS Settings section 110
- LAN Status page 111
- Application page 112
- DMZ Settings section 113
- ATA Voice Field Reference 115
- Info page 116
- Voice tab > Info page > 116
- System page 124
- SIP page 127
- Voice tab > SIP page > 127
- SIP User Agent Name 128
- Use Compact Header 128
- Regional page 139
- Call Progress Tones section 140
- SPA8000) 154
- Miscellaneous section 156
- FXS Port Output 158
- Line page 160
- Voice tab > Line page > 161
- Outbound Proxy 167
- Use Outbound 167
- Register 170
- Disconnect Tone 187
- Trunk Group page (SPA8000) 191
- SIP Settings section 192
- Dial Plan section 197
- NAT Settings section 197
- PSTN Line page (SPA3102) 199
- Network Settings section 201
- Based on SRV port 206
- Audio Configuration section 207
- Dial Plans section 211
- Caller 1/2/3/4/5/6/7/8 PIN 213
- Ring Settings section 214
- Long Silence Duration 216
- Detect Long Silence 217
- User page 221
- Call Forward Settings section 222
- Speed Dial Settings section 223
- PSTN User page (SPA3102) 227
- Troubleshooting 229
- STUN Enable 232
- STUN Server 232
- STUN Test Enable 232
- Environmental Specifications 233
- Where to Go From Here 237
- Related Documentation 238
- - Variable Defintions 241
- - Conditional Text Settings 241
© 2020, manymanuals.com. All rights reserved. | 0.801 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals